
October 14, 1994


Welcome 32X developer,


Enclosed you will find some sample 32X code.  This was originally written for
the version 1 development board.  This code is only intended to be example
code.  It does contain some errors and is limited in scope since it was
designed for the earlier development board.
		       *
To decompress the contents of the 32XCODE.ZIP file use the following command:
PKUNZIP -D 32XCODE.ZIP.

To run the code with a Cartdev do the following:
Go to the BICOS or BICOSP directories.  From there, run the HSITL32 utility
and load @dl.

To run the code with an E7000PC do the following:
Go to the BICOS or BICOSP directories.  From there, run the DL.BAT file.

This code was written using GNU C and Sierra C compilers

Please let me know if you have any problems or comments on this example code.
You can contact me through Sega Developer Technical Support at 415-802-3244 or
sending e-mail to DTS@SEGAOA.COM.


Thank you and good luck,

Rob Powers
Sega Developer Technical Support




